Complete Product Listing

DESCRIPTION

PRODUCT
NUMBER

SUGGESTED
RETAIL PRICE

Makarov rubber replacement grip. Fits the 8 shot Makarov. (all makes except high capacity)

MAK-8

$19.95

Makarov hard rubber replacement grip (high capacity). Fits the 10 and 12 shot Makarovs.

MAK-10

$19.95

Beretta Bobcat and Tomcat rubber replacement side panel grips. Fits models 21A and 3032. Not for models with extended safety.

PG-21

$17.00

Beretta Bobcat and Tomcat rubber wrap-around grips. Fits models 21A and 3032. Not for models with extended safety.

PG-32

$17.00

PG-BHP9

Taurus models PT22 and PT25 rubber wrap-around grips.

PG-T22

$17.00

Taurus model PT111 / KelTec model P11 grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine.  Note:  (Does Not Fit Taurus Millennium Pro Model)

PG-11

$9.95

Springfield Armory XD series grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Fits 9mm, 357SIG, 40SW and 45GAP only. Not for use on 45ACP models.

PG-XD

$9.95

Springfield Armory XD series grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Fits 45ACP models only. .

PG-XD45

$9.95

GLOCK Mid and Full Size Model grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Model 19,23,32 and full size 9mm/40SW/357SIG. Also fits Model 37& 38 45GAP

PG-19

$9.95

GLOCK model 26/27/33/39 grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine.

PG-26

$9.95

GLOCK model 26/27/33/39 grip extension. Replaces the magazine floor plate. This product adds 1/4 inch more length than the PG-26 Does not alter capacity.

PG-26XL

$9.95

GLOCK model 26/27/33/39 plus extension. Replaces the magazine floor plate converting the factory model 27/33/39 magazines to ten round capacity and converts the factory model 26 magazine to twelve round capacity. All your State and local laws apply.

PG-2733

$9.95

GLOCK model 26/27/33/39 plus extension. Replaces the magazine floor plate converting the factory model 39 magazine to seven round capacity, converts the factory model 27/33 magazines to eleven round capacity and converts the factory model 26 magazine to thirteen round capacity. All your State and local laws apply.

PG-39

$9.95

GLOCK model 29 grip extension. (also fits model 30 nine round mags) Replaces the magazine floor plate. Does not alter the capacity of the magazine.

PG-29

$9.95

GLOCK model 30 grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine.

PG-30

$9.95

PG-36

PG-360

GLOCK compact and full size grip enhancer. Fills the cut-out in the lower front strap of the frame adding gripping surface. For use on New Style - Full Metal Lined - Drop Free magazines. Does not alter the capacity of the magazine. 9mm, 40SW, 357 SIG and 45GAP

PG-FML

$9.95

GLOCK compact and full size grip enhancer. Fills the cut-out in the lower front strap of the frame adding gripping surface. For use on Old Style - Non Full Metal Lined - Non Drop Free magazines. Does not alter the capacity of the magazine.

PG-NFML

 
$9.95

GLOCK Magazine Extension. For use on all high capacity Non Full Metal Line and Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 2 rounds. Increases the capacity of 40 SW,357 SIG and 45GAP magazines by 1 round.

PG-G9P2

 
$9.95

GLOCK Magazine Extension. For use on all high capacity Non Full Metal Line and Full Metal Lined Glock magazines. Increases the capacity of 45ACP Model 21 and 10 mm Model 20 magazines by 2 rounds.

PG-G45P2

 
$9.95

GLOCK compact and full size grip enhancer. Fills the cut-out in the lower front strap of the grip frame adding gripping surface. For use on all M20 and M21 magazines. Does not alter the capacity of the magazine.

PG-2021

$9.95

Para- Ordnance grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Also Fits Springfield Model V10 Double Stack and Para Warthog.

PG-P10E

$9.95

Para-Ordnance model P10 (Warthog etc.) rubber wrap-around grips with checkered front strap.

PG-P10

$18.95

Para-Ordnance model P12 rubber wrap-around grips with finger grooves. Ultra Thin.

PG-P12

$19.95

Para-Ordnance model P13 rubber wrap-around grips with finger grooves. Ultra Thin.

PG-P13

$19.95

Para-Ordnance model P14 rubber wrap-around grips with finger grooves. Ultra Thin.

PG-P14

$19.95

Government Model 1911 rubber finger groove insert. Adds finger grooves to any side panel grips.   (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)

PG1911-1

$11.00

Government Model 1911 rubber side panel grips with palm swells. Ultra slim design. (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)

PG1911-2

$14.50

Government Model 1911 rubber side panel grips with palm swells and front finger groove unit. Ultra slim design. (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)

PMG-1911

$24.00

1911 Compact Model rubber finger groove insert. Adds finger grooves to any side panel grips. (Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)

PG-OM1

$11.00

1911 Compact Model rubber side panel grips with palm swells. Ultra slim design. Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)

PG-OM2

$14.50

1911 Compact Model rubber side panel grips with palm swells and front finger groove unit. Ultra slim design. (Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)

PMG-OM

$24.00

KAHR  grip extension. Fits all 9mm and 40SW models. Not for use with 45 ACP models. Replaces the magazine floor plate adding grip length. (Two extensions per package) Fits Kahr T40, TP40, P40, CW40, K40, PM40, T9, TP9, P9, CW9, K9, PM9, MK9, MK9, PM9, PM40.  Also Fits Colt Pocket Nine

PG-MK9

$14.95

AR15 and equivalents - grip adapter. Converts the pistol to a GM 1911 configuration allowing the use of most after-market 1911 grips on the AR15. Includes grips screws and mounting hardware.

PG-AR15

$19.95

AR15 and equivalents - rubber grip. Converts the grip to a Government Model 1911 configuration. Consists of one PG-AR15, one PMG-1911, grips screws and mounting hardware.

PG-AR15M

$36.00