Made in the USA

Postal Delivery

PLEASE NOTE: Orders generally ship out within one business day, but please be aware that due to the current USPS shipping backlog we have seen delays in our standard shipping option. Recent shipping times have varied widely from 3-14 days.

Browse Products

AR15

PG-AR15AR15 and equivalents - grip adapter
Converts the pistol to a GM 1911 configuration allowing the use of most after-market 1911 grips on the AR15. Includes grips screws and mounting hardware.
$24.95

Beretta

PG-21Beretta Bobcat and Tomcat rubber replacement side panel grips
Fits models 21A and 3032. Not for models with extended safety.
$19.95
PG-32Beretta Bobcat and Tomcat rubber wrap-around grips
Fits models 21A and 3032. Not for models with extended safety.
$19.95
PG-NANOGrip Extension For Beretta NANO
An extension for the Beretta NANO . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine.
$9.95
PG-380Grip Extension
For Beretta 3032 Tomcat, Kel-Tec P3AT, Kel-Tec P32, Bersa 380 single stack and other similar magazines. Does not alter the capacity of the magazine. (Two Extensions per package.)
$14.95

Colt

PG-OM11911 Compact Model Rubber Finger Groove Insert
Rubber finger grooves for Compact 1911 and equivalent frames
$12.95
PG1911-1TGovernment Model 1911 Rubber Finger Groove Insert TAN
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc. ***This is the TAN colored variant
$13.95
PG1911-2Government Model 1911 Rubber Side Panel Grips
Ultra slim GM 1911 side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$16.95
PMG-1911Government Model 1911 Modular System
Full Modular 1911 Grip. (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)
$28.00
PG-OM21911 Compact Model Rubber Side Panel Grips
Rubber Side Panel Grips. Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$16.95
PMG-OM1911 Compact Model Modular Grip System
Full Modular grip system for compact GM 1911. (Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$28.00
PG1911-1Government Model 1911 Rubber Finger Groove Insert
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$12.95

Springfield Armory

PG-OM11911 Compact Model Rubber Finger Groove Insert
Rubber finger grooves for Compact 1911 and equivalent frames
$12.95
PG1911-1TGovernment Model 1911 Rubber Finger Groove Insert TAN
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc. ***This is the TAN colored variant
$13.95
PG1911-2Government Model 1911 Rubber Side Panel Grips
Ultra slim GM 1911 side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$16.95
PMG-1911Government Model 1911 Modular System
Full Modular 1911 Grip. (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)
$28.00
PG-OM21911 Compact Model Rubber Side Panel Grips
Rubber Side Panel Grips. Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$16.95
PG-P10EGrip Extension For Para- Ordnance
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Also Fits Springfield Model V10 Double Stack and Para Warthawg.
$9.95
PG-XD+Springfield Armory XD Series Extensions
Springfield Armory XD series grip extensions. Adds capacity to 9mm (13 rd mag), 40 S&W and 357 SIG. Will not fit XDM frame. Not recommended for Mod 2 frames.
$9.95
PG-XDMGrip Extension For Springfield Armory XDM Compact
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Fits 9mm,and 40SW only. For use on XDM models with a rounded internal locking feature. Will not fit standard XD frames. Will not work on (10) round magazines with plastic magazine tube spacer. Not for XDM ELITE magazines.
$9.95
PMG-OM1911 Compact Model Modular Grip System
Full Modular grip system for compact GM 1911. (Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$28.00
PG-M2.45Grip Extension For Springfield Armory XD MOD.2 45 series
Replaces the factory magazine floor plate adding grip length while incorporating a similar texture to the factory grip. Does not alter the capacity of the magazine. Fits the 45ACP model only. Will also fit the XDM 45, but will not match this model cosmetically. This unit will NOT fit the single stack Springfield XDS 45.
$9.95
PG-M245FDEGrip Extension For Springfield Armory XD MOD.2 45 Flat Dark Earth
Replaces the factory magazine floor plate adding grip length while incorporating a similar texture to the factory grip. Does not alter the capacity of the magazine. Fits the 45ACP model only. Will also fit the XDM 45, but will not match this model cosmetically. This unit will NOT fit the single stack Springfield XDS 45.
$11.95
PG-MOD2+Springfield Armory XD MOD2 Series Magazine Extension 9mm/.40cal
Springfield Armory XD Mod 2 series grip extensions. Adds capacity to 9mm (13 rd mag), 40 S&W while incorporating a similar texture to the factory grip.
$9.95
PG-MOD2FDESpringfield Armory XD MOD2 Series Magazine Extension (Flat Dark Earth)
Springfield Armory XD Mod 2 series grip extensions. Adds capacity to 9mm (13 rd mag), 40 S&W while incorporating a similar texture to the factory grip. This part closely matches Springfields FDE color.
$11.95
PG-XDGrip Extension For Springfield Armory XD Series
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Fits 9mm, 357SIG, 40SW and 45GAP(sub-compact, compact and full size)only. Not for use on 45ACP models. Will not fit XDM frames. *** This product will fit the Springfiel XD Mod 2.
$9.95
PG-XD45Grip Extension For Springfield Armory XD series
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Fits the 45ACP model. Will also fit the XDM 45 and Mod 2 45 models, but will not match these models cosmetically. This unit will NOT fit the Springfield XDS 45.
$9.95
PG-XD45+Springfield Armory XD 45 series magazine grip extension
Replaces the magazine floor plate adding grip length. Adds one round capacity. Fits 45ACP models only. Crossover fit (texture difference) on XD Mod 2.
$9.95
PG-XDSGrip Extension For Springfield Armory XDS/XDE/XDS MOD2 series
This unit replaces the magazine base plate on the Springfield XDS/XDE/XDSMOD2 in 45ACP, 40 S&W and 9mm single stack magazines. This extension does not alter the capacity of the magazine. It adds approximately 3/4 inch additional gripping surface.
$9.95
PG-XDS+PLUS ONE Magazine Extension For XDS/XDE/XDS MOD2
This unit replaces the magazine base plate on the Springfield XDS/XDE/XDS MOD2 in 45ACP, 40 S&W and 9mm single stack magazines.(works on MOD2 as well as first generation frames). This extension adds one round capacity to the magazine. It adds approximately 7/8" inch additional gripping surface. And incorporates a texture similar to the Mod 2 pattern.
$11.95
PG1911-1Government Model 1911 Rubber Finger Groove Insert
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$12.95

Government

PG-OM11911 Compact Model Rubber Finger Groove Insert
Rubber finger grooves for Compact 1911 and equivalent frames
$12.95
PG1911-1TGovernment Model 1911 Rubber Finger Groove Insert TAN
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc. ***This is the TAN colored variant
$13.95
PG1911-2Government Model 1911 Rubber Side Panel Grips
Ultra slim GM 1911 side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$16.95
PMG-1911Government Model 1911 Modular System
Full Modular 1911 Grip. (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)
$28.00
PG-OM21911 Compact Model Rubber Side Panel Grips
Rubber Side Panel Grips. Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$16.95
PMG-OM1911 Compact Model Modular Grip System
Full Modular grip system for compact GM 1911. (Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$28.00
PG1911-1Government Model 1911 Rubber Finger Groove Insert
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$12.95

Kimber

PG-OM11911 Compact Model Rubber Finger Groove Insert
Rubber finger grooves for Compact 1911 and equivalent frames
$12.95
PG1911-1TGovernment Model 1911 Rubber Finger Groove Insert TAN
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc. ***This is the TAN colored variant
$13.95
PG1911-2Government Model 1911 Rubber Side Panel Grips
Ultra slim GM 1911 side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$16.95
PMG-1911Government Model 1911 Modular System
Full Modular 1911 Grip. (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)
$28.00
PG-OM21911 Compact Model Rubber Side Panel Grips
Rubber Side Panel Grips. Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$16.95
PMG-OM1911 Compact Model Modular Grip System
Full Modular grip system for compact GM 1911. (Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$28.00
PG1911-1Government Model 1911 Rubber Finger Groove Insert
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$12.95

GLOCK

PG-19Grip Extension for GLOCK Gen 3 Mid and Full Size Model
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Model 17, 18, 19, 22, 23, 24, 25, 31, 32, 34, 35, 9mm/40SW/357SIG. Also fits Models 37 & 38 45GAP
$9.95
PG-19G5Grip Extension For GLOCK Gen 4&5 Mid and Full Size Model
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Gen 4&5 Model 17, 19, 19MOS, 22, 23, 34, 35,44 9mm/40SW/22LR NOT FOR 10RD 9mm MAGAZINES(USE PG-19). ***Fits on new Glock model 44
$9.95
PG-26Grip Extension For GLOCK GEN 3 model 26/27/33/39
Replaces the magazine floor plate on Glock third generation models 26, 27, 33, and 39 adding grip length. Does not alter the capacity of the magazine. *** For 4th/5th Generation magazines use PG-G526
$9.95
PG-26G4Grip Extension For GLOCK Gen 4&5 model 26/27/33/39
Replaces the magazine floor plate for Glock Gen 4&5 Model 26, 27 and Model 33. This product adds approximately 1" in length. It does not alter capacity.
$9.95
PG-2733Plus Extension for GLOCK model 26/27/33/39
For Third Generation Magazines:Replaces the magazine floor plate converting the factory model 27 and 33 magazines to ten round capacity and converts the factory model 26 magazine to twelve round capacity. All your State and local laws apply.
$9.95
PG-360Grip Extension For GLOCK model 36
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine.
$9.95
PG-39Plus Extension for GLOCK model 26/27/33/39
Replaces the magazine floor plate converting the factory model 39 magazine to seven round capacity, converts the factory model 27/33 magazines to eleven round capacity and converts the factory model 26 magazine to thirteen round capacity. All your State and local restrictions apply.
$9.95
PG-42Grip Extension for GLOCK 42
An extension for the GLOCK 42 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine. This product will not fit the Glock 43.
$9.95
PG-43Grip Extension for GLOCK 43
An extension for the GLOCK 43 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine while also incorporating the factory texture pattern.
$9.95
PG-FI20SFGrip Frame Insert For GLOCK model 20SF/21SF
WILL FIT ALL 20 AND 21 SF CONFIGURATIONS. Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. For SF (Short Frames) only. Will not fit the Generation 4 frame.
$6.00
PG-FI30SGrip Frame Insert for GLOCK 30S,30SF, 29SF (POST 2012 Frames)
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits Glock 30S,30SF and 29SF. Will only fit frames made after July 2012.
$6.00
PG-FI42Grip Frame Insert for GLOCK 42 & 43
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. *** Will fit both the GLOCK 42 & 43(9mm)
$6.00
PG-FMLGrip Enhancment For GLOCK compact and full size
Fills the semi-circular cut-out in the lower front strap of the frame adding gripping surface. For use on New Style - Full Metal Lined - Drop Free magazines. Does not alter the capacity of the magazine. For generation 2 and 3 frames with front cutout.
$9.95
PG-G4+Magazine Extension for Glock GENERATION 4&5
For use on Generation 4 & 5 Sub-Compact, Mid, and Full Size high capacity Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 2 rounds. Increases the capacity of 40 SW, 357 SIG by 2 rounds and 45GAP magazines by 1 round. Will not fit the 10mm or 45ACP models.
$9.95
PG-G42733Plus Extension For GLOCK GEN 4&5 model (26/27/33)
Replaces the magazine floor plate on generation 4 & 5 converting the factory model 27 and 33 magazines to ten round capacity and converts the factory model 26 magazine to twelve round capacity. All your State and local laws apply. GEN 4 & 5 MAGAZINES ONLY. May need modification when used on some Glock 33 magazines.
$9.95
PG-G4MFGrip Frame Insert For GLOCK (Gen 4&5) Mid and Full Size Model
Back cavity frame insert for Glock mid and full sized frames. Fits model M17, 18, 19, 22, 23, 24, 31, 32, 34, 35, 37, 38, 44 and 45. This product fits Generation 4 and 5 frames.(Will not fit 20, 21, 40 and 41 models) ***Fits on new Glock 44
$6.00
PG-G4SCGrip Frame Insert for GLOCK (GEN 4) 26/27/33
This product will only fit Generation 4&5 frames in models 26, 27 and 33.
$6.00
PG-G526Grip Extension For GLOCK GEN 4&5 model 26/27
Replaces the magazine floor plate on Glock 4th and 5th generation models 26 and 27 adding (5/8")grip length. Does not alter the capacity of the magazine. ***Only for magazine tubes equipped with notches on either side to allow for ambi magazine release(Gen 4&5 magazines).
$9.95
PG-G5BPEnhanced baseplate for GLOCK Gen 5 M19,17 and 34
Fills the semi-circular cut-out in the lower front strap of the GLOCK Gen 5 frame adding gripping surface for enhanced comfort. Fits Gen 5 models 17,19 and 34. MODIFICATION MAY BE REQUIRED TO WORK ON SOME 10 ROUND MAGAZINES.
$9.95
PG-GFISCGrip Frame Insert For GLOCK Sub Compact Size model
This unit installs in the bottom rear cavity of the frame utilizing friction fit for retention. Fits M26,27,33,39. Will not fit Generation 4 or 5 frames.
$6.00
PG-GPMagazine Extension for GLOCK
For use on Mid and Full Size high capacity Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 2 rounds. Increases the capacity of 40 SW, 357 SIG by 2 rounds and 45GAP magazines by 1 round.
$9.95
PG-26XLGrip Extension For GLOCK model 26/27/33/39
Replaces the magazine floor plate for Glock Model 26, 27, 33 and Model 39. This product adds 1/4 inch more length than the PG-26. It does not alter capacity.
$9.95
PG-29Grip Extension for GLOCK model 29/29SF
Replaces the magazine floor plate. Does not alter the capacity of the magazine. (Also fits model 30 nine round mags)
$9.95
PG-30Grip Extension For GLOCK model 30/30SF/30S
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. This extension will also fit the Glock 30S.
$9.95
PG-FI36Grip Frame Insert For GLOCK model 36
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame.
$6.00
PG-GFIGrip Frame Insert For GLOCK Mid and Full Size model
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits M17,18,19,20,21,22,23,24,31,32,34,35,37,38. Will not fit Short frames or Generation 4 or 5 frames.
$6.00
PG-1045+Magazine Extension For GLOCK 29/20/21/40/41
For use on Glock M20,M21,M29,M40 and M41 Full Metal Lined Glock magazines. Increases the capacity of the magazine by 2 rounds. Incorporates fourth generation texture pattern.
$9.95
PG-42+1Plus One Extension For GLOCK 42
A magazine extension grip for the GLOCK 42 . This extension replaces the magazine floor plate providing one extra round of capacity and additional gripping surface for better control and comfort while also incorporating the factory texture pattern.
$9.95
PG-43+1Plus One Extension For GLOCK 43
A magazine extension grip for the GLOCK 43 . This extension replaces the magazine floor plate providing one extra round of capacity and additional gripping surface for better control and comfort while also incorporating the factory texture pattern. *Fits 01 and 02 magazine variants.
$9.95
PG-48Grip Extension for GLOCK 43X & 48
An extension for the GLOCK 43X & 48 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine while also incorporating the factory texture pattern.
$9.95
PG-FI21G4Grip Frame Inser For GLOCK (Gen 4) 20/21/40/41
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits 20,21,40 and 41. Will only fit Generation 4 frames.
$6.00
PG-FI30G4Grip Frame Insert for GLOCK (GEN 4) 29/30
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits fourth generation Glock 29 and 30. Will only fit Generation 4 frames.
$6.00
PG-FI48Grip Frame Insert for GLOCK 43X & 48
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. *** Will fit both the GLOCK 43X & 48(9mm)
$6.00

GLOCK GEN 3

PG-19Grip Extension for GLOCK Gen 3 Mid and Full Size Model
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Model 17, 18, 19, 22, 23, 24, 25, 31, 32, 34, 35, 9mm/40SW/357SIG. Also fits Models 37 & 38 45GAP
$9.95
PG-26Grip Extension For GLOCK GEN 3 model 26/27/33/39
Replaces the magazine floor plate on Glock third generation models 26, 27, 33, and 39 adding grip length. Does not alter the capacity of the magazine. *** For 4th/5th Generation magazines use PG-G526
$9.95
PG-2733Plus Extension for GLOCK model 26/27/33/39
For Third Generation Magazines:Replaces the magazine floor plate converting the factory model 27 and 33 magazines to ten round capacity and converts the factory model 26 magazine to twelve round capacity. All your State and local laws apply.
$9.95
PG-39Plus Extension for GLOCK model 26/27/33/39
Replaces the magazine floor plate converting the factory model 39 magazine to seven round capacity, converts the factory model 27/33 magazines to eleven round capacity and converts the factory model 26 magazine to thirteen round capacity. All your State and local restrictions apply.
$9.95
PG-FI20SFGrip Frame Insert For GLOCK model 20SF/21SF
WILL FIT ALL 20 AND 21 SF CONFIGURATIONS. Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. For SF (Short Frames) only. Will not fit the Generation 4 frame.
$6.00
PG-FI30SGrip Frame Insert for GLOCK 30S,30SF, 29SF (POST 2012 Frames)
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits Glock 30S,30SF and 29SF. Will only fit frames made after July 2012.
$6.00
PG-FMLGrip Enhancment For GLOCK compact and full size
Fills the semi-circular cut-out in the lower front strap of the frame adding gripping surface. For use on New Style - Full Metal Lined - Drop Free magazines. Does not alter the capacity of the magazine. For generation 2 and 3 frames with front cutout.
$9.95
PG-GFISCGrip Frame Insert For GLOCK Sub Compact Size model
This unit installs in the bottom rear cavity of the frame utilizing friction fit for retention. Fits M26,27,33,39. Will not fit Generation 4 or 5 frames.
$6.00
PG-GPMagazine Extension for GLOCK
For use on Mid and Full Size high capacity Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 2 rounds. Increases the capacity of 40 SW, 357 SIG by 2 rounds and 45GAP magazines by 1 round.
$9.95
PG-26XLGrip Extension For GLOCK model 26/27/33/39
Replaces the magazine floor plate for Glock Model 26, 27, 33 and Model 39. This product adds 1/4 inch more length than the PG-26. It does not alter capacity.
$9.95
PG-29Grip Extension for GLOCK model 29/29SF
Replaces the magazine floor plate. Does not alter the capacity of the magazine. (Also fits model 30 nine round mags)
$9.95
PG-30Grip Extension For GLOCK model 30/30SF/30S
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. This extension will also fit the Glock 30S.
$9.95
PG-FI36Grip Frame Insert For GLOCK model 36
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame.
$6.00
PG-GFIGrip Frame Insert For GLOCK Mid and Full Size model
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits M17,18,19,20,21,22,23,24,31,32,34,35,37,38. Will not fit Short frames or Generation 4 or 5 frames.
$6.00

GLOCK GEN 5

PG-19G5Grip Extension For GLOCK Gen 4&5 Mid and Full Size Model
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Gen 4&5 Model 17, 19, 19MOS, 22, 23, 34, 35,44 9mm/40SW/22LR NOT FOR 10RD 9mm MAGAZINES(USE PG-19). ***Fits on new Glock model 44
$9.95
PG-26G4Grip Extension For GLOCK Gen 4&5 model 26/27/33/39
Replaces the magazine floor plate for Glock Gen 4&5 Model 26, 27 and Model 33. This product adds approximately 1" in length. It does not alter capacity.
$9.95
PG-43Grip Extension for GLOCK 43
An extension for the GLOCK 43 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine while also incorporating the factory texture pattern.
$9.95
PG-FI42Grip Frame Insert for GLOCK 42 & 43
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. *** Will fit both the GLOCK 42 & 43(9mm)
$6.00
PG-G4+Magazine Extension for Glock GENERATION 4&5
For use on Generation 4 & 5 Sub-Compact, Mid, and Full Size high capacity Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 2 rounds. Increases the capacity of 40 SW, 357 SIG by 2 rounds and 45GAP magazines by 1 round. Will not fit the 10mm or 45ACP models.
$9.95
PG-G42733Plus Extension For GLOCK GEN 4&5 model (26/27/33)
Replaces the magazine floor plate on generation 4 & 5 converting the factory model 27 and 33 magazines to ten round capacity and converts the factory model 26 magazine to twelve round capacity. All your State and local laws apply. GEN 4 & 5 MAGAZINES ONLY. May need modification when used on some Glock 33 magazines.
$9.95
PG-G4MFGrip Frame Insert For GLOCK (Gen 4&5) Mid and Full Size Model
Back cavity frame insert for Glock mid and full sized frames. Fits model M17, 18, 19, 22, 23, 24, 31, 32, 34, 35, 37, 38, 44 and 45. This product fits Generation 4 and 5 frames.(Will not fit 20, 21, 40 and 41 models) ***Fits on new Glock 44
$6.00
PG-G4SCGrip Frame Insert for GLOCK (GEN 4) 26/27/33
This product will only fit Generation 4&5 frames in models 26, 27 and 33.
$6.00
PG-G526Grip Extension For GLOCK GEN 4&5 model 26/27
Replaces the magazine floor plate on Glock 4th and 5th generation models 26 and 27 adding (5/8")grip length. Does not alter the capacity of the magazine. ***Only for magazine tubes equipped with notches on either side to allow for ambi magazine release(Gen 4&5 magazines).
$9.95
PG-G5BPEnhanced baseplate for GLOCK Gen 5 M19,17 and 34
Fills the semi-circular cut-out in the lower front strap of the GLOCK Gen 5 frame adding gripping surface for enhanced comfort. Fits Gen 5 models 17,19 and 34. MODIFICATION MAY BE REQUIRED TO WORK ON SOME 10 ROUND MAGAZINES.
$9.95
PG-43+1Plus One Extension For GLOCK 43
A magazine extension grip for the GLOCK 43 . This extension replaces the magazine floor plate providing one extra round of capacity and additional gripping surface for better control and comfort while also incorporating the factory texture pattern. *Fits 01 and 02 magazine variants.
$9.95
PG-48Grip Extension for GLOCK 43X & 48
An extension for the GLOCK 43X & 48 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine while also incorporating the factory texture pattern.
$9.95
PG-FI48Grip Frame Insert for GLOCK 43X & 48
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. *** Will fit both the GLOCK 43X & 48(9mm)
$6.00

GLOCK GEN 4

PG-19G5Grip Extension For GLOCK Gen 4&5 Mid and Full Size Model
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Gen 4&5 Model 17, 19, 19MOS, 22, 23, 34, 35,44 9mm/40SW/22LR NOT FOR 10RD 9mm MAGAZINES(USE PG-19). ***Fits on new Glock model 44
$9.95
PG-26G4Grip Extension For GLOCK Gen 4&5 model 26/27/33/39
Replaces the magazine floor plate for Glock Gen 4&5 Model 26, 27 and Model 33. This product adds approximately 1" in length. It does not alter capacity.
$9.95
PG-42Grip Extension for GLOCK 42
An extension for the GLOCK 42 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine. This product will not fit the Glock 43.
$9.95
PG-43Grip Extension for GLOCK 43
An extension for the GLOCK 43 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine while also incorporating the factory texture pattern.
$9.95
PG-FI42Grip Frame Insert for GLOCK 42 & 43
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. *** Will fit both the GLOCK 42 & 43(9mm)
$6.00
PG-G4+Magazine Extension for Glock GENERATION 4&5
For use on Generation 4 & 5 Sub-Compact, Mid, and Full Size high capacity Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 2 rounds. Increases the capacity of 40 SW, 357 SIG by 2 rounds and 45GAP magazines by 1 round. Will not fit the 10mm or 45ACP models.
$9.95
PG-G42733Plus Extension For GLOCK GEN 4&5 model (26/27/33)
Replaces the magazine floor plate on generation 4 & 5 converting the factory model 27 and 33 magazines to ten round capacity and converts the factory model 26 magazine to twelve round capacity. All your State and local laws apply. GEN 4 & 5 MAGAZINES ONLY. May need modification when used on some Glock 33 magazines.
$9.95
PG-G4MFGrip Frame Insert For GLOCK (Gen 4&5) Mid and Full Size Model
Back cavity frame insert for Glock mid and full sized frames. Fits model M17, 18, 19, 22, 23, 24, 31, 32, 34, 35, 37, 38, 44 and 45. This product fits Generation 4 and 5 frames.(Will not fit 20, 21, 40 and 41 models) ***Fits on new Glock 44
$6.00
PG-G4SCGrip Frame Insert for GLOCK (GEN 4) 26/27/33
This product will only fit Generation 4&5 frames in models 26, 27 and 33.
$6.00
PG-G526Grip Extension For GLOCK GEN 4&5 model 26/27
Replaces the magazine floor plate on Glock 4th and 5th generation models 26 and 27 adding (5/8")grip length. Does not alter the capacity of the magazine. ***Only for magazine tubes equipped with notches on either side to allow for ambi magazine release(Gen 4&5 magazines).
$9.95
PG-29Grip Extension for GLOCK model 29/29SF
Replaces the magazine floor plate. Does not alter the capacity of the magazine. (Also fits model 30 nine round mags)
$9.95
PG-30Grip Extension For GLOCK model 30/30SF/30S
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. This extension will also fit the Glock 30S.
$9.95
PG-1045+Magazine Extension For GLOCK 29/20/21/40/41
For use on Glock M20,M21,M29,M40 and M41 Full Metal Lined Glock magazines. Increases the capacity of the magazine by 2 rounds. Incorporates fourth generation texture pattern.
$9.95
PG-42+1Plus One Extension For GLOCK 42
A magazine extension grip for the GLOCK 42 . This extension replaces the magazine floor plate providing one extra round of capacity and additional gripping surface for better control and comfort while also incorporating the factory texture pattern.
$9.95
PG-43+1Plus One Extension For GLOCK 43
A magazine extension grip for the GLOCK 43 . This extension replaces the magazine floor plate providing one extra round of capacity and additional gripping surface for better control and comfort while also incorporating the factory texture pattern. *Fits 01 and 02 magazine variants.
$9.95
PG-48Grip Extension for GLOCK 43X & 48
An extension for the GLOCK 43X & 48 . This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine while also incorporating the factory texture pattern.
$9.95
PG-FI21G4Grip Frame Inser For GLOCK (Gen 4) 20/21/40/41
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits 20,21,40 and 41. Will only fit Generation 4 frames.
$6.00
PG-FI30G4Grip Frame Insert for GLOCK (GEN 4) 29/30
This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention. Fits fourth generation Glock 29 and 30. Will only fit Generation 4 frames.
$6.00
PG-FI48Grip Frame Insert for GLOCK 43X & 48
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. *** Will fit both the GLOCK 43X & 48(9mm)
$6.00

Para

PG1911-1TGovernment Model 1911 Rubber Finger Groove Insert TAN
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc. ***This is the TAN colored variant
$13.95
PG1911-2Government Model 1911 Rubber Side Panel Grips
Ultra slim GM 1911 side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$16.95
PMG-1911Government Model 1911 Modular System
Full Modular 1911 Grip. (Fits Colt, Kimber, Springfield Armory, Para Ordnance Single Stack Models etc.)
$28.00
PG-OM21911 Compact Model Rubber Side Panel Grips
Rubber Side Panel Grips. Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$16.95
PG-P10EGrip Extension For Para- Ordnance
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Also Fits Springfield Model V10 Double Stack and Para Warthawg.
$9.95
PMG-OM1911 Compact Model Modular Grip System
Full Modular grip system for compact GM 1911. (Fits Springfield V10 (single column), Colts Officer Model/CCO/Defender, Kimber Compact, Para Ordnance C7.45 and equivalent frame models)
$28.00
PG1911-1Government Model 1911 Rubber Finger Groove Insert
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$12.95

Ruger

PG1911-1TGovernment Model 1911 Rubber Finger Groove Insert TAN
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc. ***This is the TAN colored variant
$13.95
PG-LCPGrip Extension For Ruger LCP and LCP II
Replaces the magazine floor plate adding grip length. (Two extensions per package.) .380 Cal ONLY.
$14.95
PG1911-1Government Model 1911 Rubber Finger Groove Insert
Adds finger grooves to any side panel grips. Fits Colt, Kimber, Springfield Armory, Para Ordnance Full Sized Single Stack Models, etc.
$12.95

KAHR

PG-K380Grip Extension for Kahr P380/CW380
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. (Two extensions per package.)
$14.95
PG-MK9Grip Extension for KAHR 9/40 compacts
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. (Two extensions per package.)
$14.95

KelTec

PG-380Grip Extension
For Beretta 3032 Tomcat, Kel-Tec P3AT, Kel-Tec P32, Bersa 380 single stack and other similar magazines. Does not alter the capacity of the magazine. (Two Extensions per package.)
$14.95
PG-11Taurus model PT111 / KelTec model P11 grip extension
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Note: (Does Not Fit Taurus Millennium Pro Model or the Generation 2 Model)
$9.95

Bersa

PG-380Grip Extension
For Beretta 3032 Tomcat, Kel-Tec P3AT, Kel-Tec P32, Bersa 380 single stack and other similar magazines. Does not alter the capacity of the magazine. (Two Extensions per package.)
$14.95

M P SHIELD

PG-9EZGrip Extension For M&P 9mm SHIELD EZ
This unit replaces the magazine base plate on the single stack M&P 9mm SHIELD EZ. This extension does not alter the capacity of the magazine. It adds approximately 1/2" inch additional gripping surface with enhanced ergonomics. 9mm models only
$9.95
PG-MPSGrip Extension For M&P SHIELD & SHIELD M2.0
This unit replaces the magazine base plate on the single stack M&P SHIELD & SHIELD 2.0 9mm and 40 cal. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface. NOT FOR EZ FRAMES. NOT FOR "PLUS" FRAMES.
$9.95
PG-MPS+2Magazine Extension For M&P SHIELD & SHIELD M2.0
A magazine extension grip for the M&P SHIELD . This extension replaces the magazine floor plate providing Two extra rounds of 9mm and One round of .40 cal. It also adds 1" additional gripping surface for better control and comfort while also incorporating the factory texture pattern. *NOT FOR EZ FRAMES or "PLUS" frames
$11.95
PG-EZGrip Extension For M&P 380 SHIELD EZ
This unit replaces the magazine base plate on the single stack M&P 380 SHIELD EZ. This extension does not alter the capacity of the magazine. It adds approximately 1/2" inch additional gripping surface with enhanced ergonomics. 380ACP models only
$9.95
PG-MPS45M&P SHIELD M2.0 45 grip extension
This unit replaces the magazine base plate on the M&P Shield 45 ACP. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface. NOT FOR USE ON EXTENDED MAGAZINE.
$9.95
PG-MPPLM&P 9 SHIELD PLUS grip extension
This unit replaces the magazine base plate on the M&P 9 SHIELD PLUS. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface and incorporates a texture pattern similar to the frame. FOR 10 round magazines ONLY. NOT FOR EZ FRAMES. NOT FOR ORIGINAL SHIELD "single stack" FRAMES.
$9.95

Smith Wesson

PG-9EZGrip Extension For M&P 9mm SHIELD EZ
This unit replaces the magazine base plate on the single stack M&P 9mm SHIELD EZ. This extension does not alter the capacity of the magazine. It adds approximately 1/2" inch additional gripping surface with enhanced ergonomics. 9mm models only
$9.95
PG-MPSGrip Extension For M&P SHIELD & SHIELD M2.0
This unit replaces the magazine base plate on the single stack M&P SHIELD & SHIELD 2.0 9mm and 40 cal. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface. NOT FOR EZ FRAMES. NOT FOR "PLUS" FRAMES.
$9.95
PG-MPS+2Magazine Extension For M&P SHIELD & SHIELD M2.0
A magazine extension grip for the M&P SHIELD . This extension replaces the magazine floor plate providing Two extra rounds of 9mm and One round of .40 cal. It also adds 1" additional gripping surface for better control and comfort while also incorporating the factory texture pattern. *NOT FOR EZ FRAMES or "PLUS" frames
$11.95
PG-EZGrip Extension For M&P 380 SHIELD EZ
This unit replaces the magazine base plate on the single stack M&P 380 SHIELD EZ. This extension does not alter the capacity of the magazine. It adds approximately 1/2" inch additional gripping surface with enhanced ergonomics. 380ACP models only
$9.95
PG-FIMPSGrip Frame Insert for M&P Shield 9mm and .40
Fills in the cavity in the heel of the grip body utilizing a friction fit to secure it to the frame. NOT for EZ frames.
$6.00
PG-MPS45M&P SHIELD M2.0 45 grip extension
This unit replaces the magazine base plate on the M&P Shield 45 ACP. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface. NOT FOR USE ON EXTENDED MAGAZINE.
$9.95
PG-MPPLM&P 9 SHIELD PLUS grip extension
This unit replaces the magazine base plate on the M&P 9 SHIELD PLUS. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface and incorporates a texture pattern similar to the frame. FOR 10 round magazines ONLY. NOT FOR EZ FRAMES. NOT FOR ORIGINAL SHIELD "single stack" FRAMES.
$9.95

Honor Defense

PG-MPSGrip Extension For M&P SHIELD & SHIELD M2.0
This unit replaces the magazine base plate on the single stack M&P SHIELD & SHIELD 2.0 9mm and 40 cal. This extension does not alter the capacity of the magazine. It adds approximately 3/4" inch additional gripping surface. NOT FOR EZ FRAMES. NOT FOR "PLUS" FRAMES.
$9.95

Makarov

MAK-8Makarov rubber replacement grip
Fits the 8 shot Makarov. Will not fit the Hungarian PA63 nor any high capacity Makarov
$24.95

SIG

PG-365Grip Extension For SIG P365
This unit replaces the magazine base plate on the SIG P365 (10 round magazines). This extension does not alter the capacity of the magazine. It adds approximately 5/8" inch additional gripping surface (1/4" longer than factory extension) as well as enhanced ergonomics. **Not for 365XL
$9.95
PG-R12Grip Extension For SIG P365 12 round
This unit replaces the magazine base plate on the SIG P365 (12 round magazines). This extension does not alter the capacity of the magazine. It adds approximately 1/4" inch additional gripping surface and acts to enhance the overall ergonomics of the grip. **Not for 365XL or 365XL 12 round magazines.
$9.95

Taurus

PG-11Taurus model PT111 / KelTec model P11 grip extension
Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Note: (Does Not Fit Taurus Millennium Pro Model or the Generation 2 Model)
$9.95
PG-709Grip Extension For Taurus PT709 + PT740
An extension for the Taurus Slim PT709 (9mm) and the PT740 (40S&W). This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine.
$9.95
PG-T22Taurus models PT22 and PT25 rubber wrap-around grips
Rubber Wrap Around Grip for Taurus Model PT22 and PT25.
$19.95
PG-TCPGrip Extension For Taurus TCP .380 ACP
An extension for the Taurus TCP .380 ACP. This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine. Extensions are packaged one per pack.
$9.95